It is a long weekend so good progress is being made. I flipped the dinghy hull, sanded and put another undercoat on.
Then I got to work on the canoe. I had fibreglass taped inside the seams and epoxied the inside. and then faired and radiused the outside. so after some sanding I sheathed the outside with fibreglass and a few coats of epoxy. Today I sanded down the epoxy and used up the last of the international prekote. Just enough to cover the canoe.
Back to work on the dinghy and it was time for some shiny stuff. I am using international toplac, I added some thinners and set about rolling and tipping. First time rolling and tipping and I am happy with parts of the job. There are few areas that didn't come out too well, they can be sanded and fixed on the next coat.
No comments:
Post a Comment